Key Sheets
Gold Cup pumps P6, P7, and P8
Example model code:
  P6P -2 R 1 * -40 2 -B 00 -0 B 0  
Type                          
Fixed displacement, closed circuit P6F                        
P7F                        
P8F                        
Fixed displacement with high torque thru-drive, closed circuit P6M                        
P7M                        
P8M                        
Variable displacement, closed circuit P6P                        
P7P                        
P8P                        
Variable displacement with high torque thru-drive, closed circuit P6R                        
P7R                        
P8R                        
Variable displacement with high torque thru-drive & shuttle package, closed circuit P6L                        
P7L                        
P8L                        
Variable displacement with medium torque thru-drive, closed circuit P6X                        
P7X                        
P8X                        
Variable displacement with medium torque thru-drive & shuttle package, closed circuit P6S                        
P7S                        
P8S                        
Variable displacement, open circuit P6V                        
P7V                        
P8V                        
Variable displacement, open & closed circuit P6D                        
P7D                        
P8D                        
Shaft                          
Keyed SAE - mechanical shaft seal (single lip seal on P*F/M) -2 or -02                      
Splined SAE - mechanical shaft seal (single lip seal on P*F/M) -3 or -03                      
Keyed SAE-D (mounting & shaft) - mechanical shaft seal (single lip seal on P*F/M) -4 or -04                      
Splined SAE-D (mounting & shaft) - mechanical shaft seal (single lip seal on P*F/M) -5 or -05                      
Keyed SAE - double lip shaft seal -7 or -07                      
Splined SAE - double lip shaft seal -8 or -08                      
Keyed (long) SAE - double lip shaft seal -9 or -09                      
Keyed (long) SAE - mechanical shaft seal -10                      
Rotation                          
Clockwise     R                    
Counter-clockwise     L                    
Seals                      
Nitrile (Buna N)   1                  
EPR (n/a for "5A" or "5C" primary controls)(pump unpainted unless otherwise specified)(for P*F/M)   4                  
EPR (n/a for "5A"or"5C" primary controls)(pump unpainted unless otherwise specified)(for P*P/R/L/X/S/V/D)   4                  
Flourocarbon (Viton)(for P*F/M)   5                  
Flourocarbon (Viton)(for P*P/R/L/X/S/V/D)   5                  
Design letter (assigned by manufacturer) *                
Primary controls                
None (for fixed displacement units only) omit              
Screw adjustment (spring offset to maximum displacement) -10              
Cylinder control w/ adjustable maximum volume stops -2A              
Cylinder control - 3 position (spring centered with zero adjustment) -2H              
Cylinder control - 2 position electro-hydraulic w/ adjustable maximum volume stop (spring offset to maximum displacement) -2M              
Cylinder control - 3 position (spring centered) electro-hydraulic -2N              
Rotary servo - spring centered -40              
Rotary servo - spring centered w/ adjustable maximum volume stops -4A              
Rotary servo - spring centered w/ automatic brake control -4B              
Rotary servo - spring centered w/ adjustable maximum volume stops & automatic brake control -4C              
Electro-hydraulic stroker w/ adjustable maximum volume stops -5A              
Electro-hydraulic stroker w/ adjustable maximum volume stops & automatic brake control -5C              
High IQ with 10 gpm servovalve & volume indicator -7D              
High IQ with 10 gpm servovalve & 4A (rotary servo) control -7F              
High IQ with 4DC01 valve & volume indicator -7J              
High IQ with 4DC01 valve & 4A (rotary servo) control -7K              
Hydraulic stroker w/ adjustable maximum volume stops -8A              
Hydraulic stroker w/ adjustable maximum volume stops & automatic brake control -8C              
Electro-hydraulic stroker w/ adjustable maximum volume stops -9A              
Electro-hydraulic stroker w/ adjustable maximum volume stops & automatic brake control -9C              
Secondary controls              
None (for fixed displacement units only) omit            
Volume indicator 2            
Torque limiter & volume indicator 4            
Cam position feedback potentiometer 6            
Cam position feedback RVDT (DC) 8            
Control location            
None (for fixed displacement units only) omit          
Primary control on port A side -A          
Primary control on port B side -B          
Control and displacement features          
2M* & 2N* controls          
4D01 valve, 110VAC/60Hz with Hirschmann connector 00        
4D01 valve, 12VDC with Hirschmann connector 01        
4D01 valve, 240VAC/50Hz with Hirschmann connector 02        
4D01 valve, 110VAC/60Hz, wiring box 03        
4D01 valve, 12VDC, wiring box 04        
Cetop3 (D03)(NG6) interface, no directional valve 05        
4D01 valve, 24VDC with Hirschmann connector 06        
4D01 valve, 110VAC/50Hz with Hirschmann connector 07        
5** controls          
with deadband 00        
without deadband 01        
7** controls          
without manual override shutoff 00        
with manual override shutoff (required for F & K primary options) 01        
8** controls          
75 - 350 psi (5 - 24 bar) 00        
75 - 435 psi (5 - 30 bar) 01        
100 - 380 psi (7 - 26 bar) 02        
150 - 400 psi (10 - 28 bar) 03        
75 - 250 psi (5 - 17 bar) 04        
9** controls          
24VDC 00        
12VDC 01        
All other controls 00        
Reduced displacement options for P*F & P*M          
Standard cam (19-degree) 00        
P6 with 17-degree cam {5.3 cu.in./rev. (87 cc/rev.)} 10        
P7 with 17-degree cam {6.4 cu.in./rev. (105 cc/rev.)} 10        
P8 with 17-degree cam {7.1 cu.in./rev. (116 cc/rev.)} 10        
P6 with 15-degree cam {4.6 cu.in./rev. (76 cc/rev.)} 20        
P7 with 15-degree cam {5.6 cu.in./rev. (92 cc/rev.)} 20        
P8 with 15-degree cam {6.2 cu.in./rev. (102 cc/rev.)} 20        
P6 with 13-degree cam {4.0 cu.in./rev. (66 cc/rev.)} 30        
P7 with 13-degree cam {4.8 cu.in./rev. (79 cc/rev.)} 30        
P8 with 13-degree cam {5.3 cu.in./rev. (88 cc/rev.)} 30        
Internal pump        
1.07 cu.in./rev. (17.5 cc/rev.) (for P*P/S/X/V/D only) (omit if no external drive is required) -0      
No internal pump (standard on P*R/L/F/M)(no price adder for P*R/L/F/M units) -X      
External drive      
None omit    
Blanking plate (for P*S/X only)(contains an SAE-B mount) M    
SAE-A (SAE 82-2)(for P*S/X/R/L/M only) (no price adder for P*R/L units) A    
SAE-B (SAE 101-2)(for P*S/X/R/L/M only) (no price adder for P*R/L units) B    
SAE-C (SAE 127-2)(for P*R/L/M only) C    
External mounting    
No external pump mounted (omit if no external drive is required) omit  
External pump mounted (requires special modification "-M2")(must be separately specified) 1  
Special modification  
None omit
No paint -NP
Other special modification (examples: bronze caged barrel bearing for low viscosity fluids, tandem pumps, etc.) -M2
*Consult Factory for Pricing TB Vane Pump
Reclamation system
5 psi check valve

 


© 2008 Rocky Mountain Hydrostatics. All rights reserved.
site designed and maintained by RayfieldCreative.

At Rocky Mountain Hydrostatics, our primary business objective is to supply remanufactured axial piston pumps on an
exchange basis, with in stock availability, 100% of the time.

All information and material posted on this Website are subject to copyrights owned by Jordan Investments, Inc., DBA Rocky Mountain Hydrostatics, Inc., (RMH).
Any reproduction, retransmission, republication, or other use of all or part of any document found
on this site is expressly prohibited, unless prior written permission has been granted by RMH. All other rights reserved.